Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
�---++- , (v
v
Q
w
�
w
�
·1
(i)
E
COOL*
"f
1
[FANI -
�---++- , (v
Q
V
w
�
w
�
For more details visit www.MrCool.com
How to use the buttons
Ensure the unit is plugged in and power is on.
The OPERATION indic ator on the display
panel of the indoor unit st arts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the desired
temperature.The temperature can be set within
a range of 62
increments (
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode Cooling, Fan, and Heating by
sensing the difference between the actual ambient
room temperature and the setting temperature on
the remote control.
2. In the Auto mode, you can not switch the fan speed.
It will be automatically controlled.
3. To deactivate Auto mode, the desired mode can be
selected manually.
Cooling / Heating/Fan operation
Ensure the unit is plugged in and power is on.
1. Press the button to select COOL, MODE
HEAT or FAN mode.
2. Press the UP/DOWN button to set the desired
temperature.The temperature can be set within
a range of 62
increments (
3. Press the FAN button to selectthe fan speed
in four steps-Auto, Low, Med,or High.
NOTE
In the FAN mode, the setting temperature
displayed in the remote control and you are not
able to control the room temperature either. In this
case, only step 1 and 3 may be performed.
Auto operation
°
°
F (16
C) to 86
°
°
F or
C depending on mode).
°
°
F (16
C) to 86
°
°
F or
C depending on mode).
°
°
°
F (30
C) in 1
°
°
°
F (30
C) in 1
not
is
Publicité
Table des Matières
