Télécharger Imprimer la page

Hubbell FLL Instructions D'installation page 2

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION INSTRUCTIONS - FLL/FXL LED FLOOD
Mounting The Visor (See Fig. 2)
• • • •
Turn off power to electrical connections.
Remove fixture from packaging along with hardware bag.
Remove the two screws at the locations shown in Fig. 2.
Mount the visor using the #6-32 x 1/2" long screws supplied with the Visor.
Adjust visor to the desired loaction and tighten the screws until firm.
Installing the Photocontrol (See Fig. 3 and Fig. 4)
• • • •
Turn off power to electrical connections.
• • • •
Wiring must be performed by a qualified electrician.
Remove fixture from packaging along with hardware bag.
Using a phillips head screw driver, remove the 6-Screws on the rear of the FLL or the
10-Screws on the rear of the FXL.
Remove the Rear Plate and Drill a 3/4" diameter hole on the location shown in Fig 3a for
FLL or Fig 3b for FXL.
Mount the Photocontrol in the drilled hole.
Connect the Photocontrol as shown in Fig. 4a for FLL or Fig 4b for FXL.
Reinstall the Rear Housing and tighten the Screws that were removed.
.750
O
1.755
1.625
Fig 3a: FLL Rear Plate with Hole
O
.750
1.250
2.500
Fig 3b: FXL Rear Plate with Hole
NOTES:
For replacement LED Assemblies and Drivers please contact Hubbell Lighting for any replacement parts.
Contact your local distributor or agent to confirm parts availability prior to ordering replacement parts.
701 Millennium Boulevard Greenville, SC 29607 (864) 678-1000
SAVE THESE INSTRUCTIONS
LOCATION OF SCREWS
TO BE REMOVED
LINE
COM
GROUND
Fig. 2: Mounting The Visor
PHOTOCONTROL
OPTION
LINE
BLACK (LINE)
COM
AC INPUT
WHITE(NEUT)
GROUND
GREEN
GRD
Fig 4a: Wiring Diagram for FLL Flood
BLACK (LINE)
PHOTOCONTROL
AC INPUT
OPTION
WHITE(NEUT)
GREEN
GRD
BLACK (LINE)
AC INPUT
WHITE(NEUT)
Fig 4b: Wiring Diagram for FXL Flood
SHEET 2 OF 2
LED BOARD
RED(+)
DC OUTPUT
BLACK(-)
DRIVER
PURPLE(+)
DIMMING
LEADS
GREY(-)
LED BOARD
RED(+)
DC OUTPUT
BLACK(-)
DRIVER
PURPLE(+)
DIMMING
LEADS
GREY(-)
RED(+)
DC OUTPUT
BLACK(-)
DRIVER
PURPLE(+)
DIMMING
LEADS
GREY(-)
LED BOARD
BLACK(-)
RED(+)
www.hubbelloutdoor.com

Publicité

loading

Ce manuel est également adapté pour:

Fxl