Before Use; Intended Use - aidapt VM951 Instructions D'utilisation Et D'entretien

INTRODUCTION
Thank you for deciding to purchase the Nail Clipper from Aidapt. The Nail Clipper is
manufactured from the finest materials available. When used correctly it is
designed to give many years of reliable, trouble-free service.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

The Nail Clipper is ideal for use as a Toenail Clipper or Fingernail Clipper and helps
to make trimming easier and safer.
INSTRUCTIONS FOR USE
While the function is much like standard toenail clippers, the Aidapt Nail
•
Clipper has a large, non-slip base with suction pads for stability and a
smooth operation for comfort.
Uses the Nail Clipper as you would a standard nail clipper, or fix it to a flat
•
surface using the built-in suction pads, for single-handed use.
It is generally easier to cut your toe or finger nails after soaking them in
•
warm water, ideally following a bath or shower. This softens the nail, which
improves comfort, makes clipping easier and reduces the risk of injury to
the user.
CLEANING
Clean your Aidapt Nail Clipper using a non-abrasive cleaner or mild detergent with
a soft cloth only. Only use a mild detergent or disinfectant; never use an abrasive
cleaner. Always ensure that you wipe dry all equipment.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all
components for their safety.
If in any doubt, please do not issue or use, but immediately contact your
supplier for service support.
Usage and Maintenance Instructions
2
Ver. 2 08/2012 (2117)