THM6000R7001 RedLINK™ Internet Gateway
Installation
Step 1
Connect the power cable to the RedLINK internet gateway.
Step 2
Connect the power adapter to a wall socket.
Step 3
Connect an Ethernet cable from
the RedLINK internet gateway
to an internet-connected home
router.
Step 4
Enter the WIRELESS SETUP
MODE on your thermostat (refer
to thermostat instructions).
Step 5
Press and release the CONNECT button
on the side of the RedLINK internet
gateway.
Step 6
Instruct the homeowner on the account
set up and registration process.
• Visit www.mytotalconnectcomfort.
com and create an account.
• Validate the account.
• Log in and register the gateway at
www.mytotalconnectcomfort.com
by entering the MAC ID and MAC
CRC found on the bottom of the device.
• Provide company business card so that the homeowner can enter your
contact information.
33-00250EFS—01
2
M36568
M36571