Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Close the case of your computer, and reconnect it to
power.
• Turn your computer back on.
PCIe Express
Einsteckkarte /
Slot card
PCIe Steckplatz / PCIe Slot
Replacing the slot cover
(optional for use with a mini PC)
The slot cover is connected to the card with two screws.
Loosen the screws carefully using an appropriate screw-
driver. Take special care not to damage the card.
After you have removed the screw and the slot cover,
replace it with the low-profile slot cover. Attach the cover
using the two screws and tighten them carefully. Install
the card in your computer as described in the section on
hardware installation.
Safety instructions:
Keep this device away from heaters and radiators and
free of dust or moisture when operating.
Power supply (optional)
The card is equipped with an internal four-pin power
connection.
You usually connect the power connection to you
computer's internal power supply if you use USB devices
that do not have a power supply of their own.
Carefully insert a free power supply cable from your com-
puter into the power connection. Ensure that the plug is
turned correctly when you insert it. With the right polarity,
it can be inserted without exerting much force.
Caution: ! If the plug is turned the wrong way, the power
supply, computer or card may be damaged.
Hama GmbH & Co KG accepts no liability for damage that
arises from a failure to observe these instructions.
Slotblech /
Slot plate
!
Support information:
Contact your dealer or Hama Product Consulting if you
have a faulty product:
Support Hotline – Hama Product Consulting:
(Languages: German and English)
Tel.: +49 (0) 90 91 / 502 – 115
Fax: +49 (0) 90 91 / 502 – 272
E-mail: mailto:produktberatung@hama.de
Product information and new drivers can found on the
Internet at www.hama.com
9
Publicité
Table des Matières
