Safety Instructions - Mi Smart M055MGN Mode D'emploi

Safety Instructions

Before using the product, make sure to carefully read the following safety instructions and safety labels descriptions.
Preventing Electric Shocks and Fire Hazards:
- Only use the provided genuine power adapter.
- Unplug the projector from the electrical outlet during thunderstorms or when it is not being used for a long time, so as to avoid
damage caused by a power surge or lightning strike.
- Do not place any flammable objects near this projector so as to avoid fire.
- Do not block any of the vents as this may cause heat build-up inside the projector, and possibly result in a fire.
- Do not block the lens when the projector is turned on. Any object placed close to the lens may get very hot and/or deformed, and may even cause a fire.
Safety Precautions:
- Do not place this projector on an unstable platform, stand or table so as to prevent it from falling and causing serious damage or
personal injuries.
- Do not look directly into the lens to avoid eye damage as the projector will emit strong light during working.
- Do not attempt to disassemble this projector as there are dangerous high voltage components inside that can cause personal
injuries. This projector must only be maintained or repaired by a highly experienced or qualified technician.
- Do not expose this projector to rain or moisture (its operating humidity is 20–80%).
- Do not immerse this projector in, nor expose it to water or other liquids. Immediately unplug the projector if any liquid or object got
into its housing, and have it checked by a qualified technician before using it again.
5