Replacing The Filters - Bissell AIR 2847 Serie Mode D'emploi

Replacing the Filters

Filter life varies based on run time and existing air conditions. It is recommended to replace both the
HEPA and activated carbon filters once every six months. It is also recommended to occasionally
vacuum the fabric front panel to remove dust.
If your digital display is
1.
showing F-1 and/or F-2, this
means that either one or both
of your filters needs to be
replaced.
F-1: HEPA filter
F-2: Carbon filter
F-1 and F-2: Both filters
Note: The source of electrical supply is to be disconnected prior to the beginning of any such
servicing or cleaning operation.
Replace the filters following
2.
steps 1-4 on page 5.
After replacing your filter(s),
3.
press and hold down the power
button for 3 seconds to reset
the filter(s). Once reset, your
air320 Max will beep and the
F-1 and/or F-2 will no longer
show on the digital display.
9