Technical Data - IKEA FNURRA Mode D'emploi

8
Charging
When battery is low the battery symbol will flash. Connect
a power supply to the USB-C connector (3). For charging,
use only Ni-MH type AA rechargeable batteries. Do not
use or attempt to charge other types such as Alkaline,
Carbon Zink etc. The wake up lamp has built in protection
and will detect wrong battery types. Er will show in
display in case of error
Recommended power supply:
5V DC, min 2A (Not included)
Recommended battery types:
3 x IKEA LADDA 2450 (AA, 1.2V, 2450mAh, Ni-MH) (not
included). Use only Ni-MH type batteries.
Do not use Alkaline, Carbon Zink etc battery types.
Do not mix batteries of different capacities, types or date
stamps.
Remove batteries if luminary to be stored for a long
period or before it is scrapped.
Disconnect device from supply before removing batteries
and dispose batteries safely

TECHNICAL DATA

Type nr: E1803
Input: 5V DC, 1A, 5W or 3xAA
Max lumen output: 130lm
IP-Class: IP44
Operating temperatures: 0°C to 40°C (32°F to 104°F)