1 General
1.1 Local value of the assembly/operating manual
The guiding principle for safe use and trouble-free operation of this workstation frame is knowledge
of basic safety information and regulations. This assembly/operating manual contains the most im-
portant information needed for assembling and operating the workstation frame safely. This assem-
bly/operating manual, in particular the safety information contained herein, must be observed by any
person building the frame and working on the finished surface. More importantly, the rules and regu-
lations applying to accident prevention in the locality in which the workstation frame is to be used
must be observed at all times.
1.2 Intended use
The workstation frame must be used only as a manually height-adjustable workstation for sitting/
standing use in offices or other enclosed areas. The frame must be used for this purpose only. Please
observe the provisions of Section 2, Safety Information. Children may be unaware of the dangers pre-
sented by the workstation frame if unsupervised. Any other use than the above shall be deemed im-
proper. The manufacturer can in no way be held liable for damage arising from improper use.
Intended use shall also include:
Observation of all information from the assembly/operating manual and
•
Prohibition of any sort of addition to/conversion of the workstation.
•
1.3 Improper use
Never use the workstation frame to lift people or loads.
•
Do not exceed the maximum load of the workstation frame (see Section 4, Technical Specifica-
•
tions).
WARNING
Any changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
3