Installation And Configuration - Perenio PECSS01 Mode D'emploi

GENERAL INFO
Compatibility
Specification
1
Scope of Supply
Warranty

INSTALLATION AND CONFIGURATION

1. Make sure that the Perenio® Control Gateway or the IoT Router was pre-installed and connected to the
network via Wi-Fi/Ethernet cable.
2. Unpack the Smoke Sensor, unfasten its mounting bracket and remove the battery insulating strip to power
it on (The LED will blink). Fasten back the mounting bracket.
3. Log in to your Perenio Smart Account. Then, click on the "+" icon in the "Devices" tab and follow
connection tips specified on the screen. Complete connection process.
4. Click on the sensor image in the "Devices" tab to manage its functionality.
SAFETY OPERATION RULES
The User shall observe recommendations on ceiling installation, as well as storage and transportation conditions,
and working temperature ranges as specified in the Installation and Operation Manual. The device must not be
installed outdoors or exposed to moisture, dust, marine air, etc. It is not allowed to drop, throw or disassemble the
device, as well as attempt to repair it on one's own.
TROUBLESHOOTING
1. An alarm just after the sensor is powered on: High dust/vapor content. Clean the sensor or ventilate the room.
2. Short beeps or absent/faint alarm after the sensor is powered on: Low battery level of the sensor. Change the
battery.
3. No alarm after pressing the test button: The battery is improperly inserted or low battery level. Observe the
battery polarity or change the battery.
This device is for indoor installation only.
1
All information contained herein is subject to amendments without prior notification of the User. For current information
2
and details on the device description and specification, connection process, certificates, warranty and quality issues, as well as the
Perenio Smart app functionality, see
perenio.com/documents. All trademarks and names herein are the property of their respective owners. See operating
conditions and date of manufacture on the individual packaging. Manufactured by Perenio IoT spol s r.o. (Na Dlouhem 79,
Ricany - Jazlovice 251 01, Czech Republic). Made in China.
Doc Date: 12/11/2020
©Perenio IoT spol s r.o. All Rights Reserved
iOS (12.0 and higher), Android (5.1 and higher)
ZigBee HA 1.2 (Wireless connection distance: Up to 40m), battery operated (DC 3V,
1500mAh), high-decibel alarm (up to 85dB/3m), white color, mounting bracket, LED
indicator, timely detection of smoke, alarm testing function, ultra-low power
consumption, tool-free installation option. Dimensions: 60 mm x 60 mm x
49.2 mm. Operating conditions: -10°C to +50°C, up to 95% RH (non-condensing)
PECSS01 Smoke Sensor, CR123A Battery, 2x Screws with Dowels, Reset Pin,
3M Mounting tape, Quick Start Guide, Warranty Card, Sticker
2 years (Service life: 2 years)
2
relevant Installation and Operation Manuals available for downloading at
Version: 3.0.0 1