Midea MNRG17-W Manuel Utilisateur page 13

6. Fill the pulp container with water and place it on top of the disc to
compress the tofu pudding. The hot liquid in the tofu pudding will flow out
through the spaces in the mold.
7. Allow the pulp container to remain in place for a minimum of 1
It can remain in place longer, depending on your firmness preference.
NOTES: To decrease the molding time, you may place a heavier object on
top of the water-filled pulp container.
8. After molding, remove the water-filled pulp container and pour out the
water. Replace the pulp container into the tofu mold, and then turn the
mold upside down.
9. Lightly press downward on the bottom disc while pulling up on the tofu
mold to push out the molded tofu.
a
b
a
Pulp Container
b
Tofu Mold
a
a
Bottom Disc
b
Tofu Mold
b
c
Pulp Container
c
1/2
to 2 hours.
Page 13