Installing The Wall Transmitter - Hinkley 52 VERGE Manuel D'instructions

INSTALLING THE WALL TRANSMITTER

REMEMBER to turn off the power before you begin. Outlet box
Switch
Remove the existing wall plate and the old switch from the wall
1
Wall plate
outlet box. Wire nut the BLACK leads (hot) together and push back
inside the outlet box. (Fig. 1)
Install the wall transmitter on the existing wall outlet box using the
2
screws provided. Attached the wall plate with the mounting screws
to finish the installation. (Fig. 2)
Fig. 1
Transmitter
Decorative Wall Plate
Fig. 2
©2019 Hinkley Lighting, Inc. | hinkley.com | 13