physionics FF EUROPE EXBK05 Mode D'emploi Original page 22

Step 1
Align the holes on the foot tube (part 14) with the mainframe (part 17), and use the M8*50
carriage screw (part 15), Ф8.5 arc washer (part 8) and M8 cap nut (part 13) for assembly.
Tighten the M8 cap nut (part 13).
Step 2
Install the pedal (part 16) onto the crank on the mainframe (part 17), then tighten it.
Note: Distinguish the position of the right and left pedal.
Apply the above-mentioned method to assemble the right pedal (part 12).
EN
ASSEMBLY INSTRUCTIONS
22
Parts Diagram
No.
Ф8.5 Arc washer
No. Parts Diagram
12
16
Parts Name Qty
M8 cap nut
M8*50 carriage
screw
Parts Name Qty
1
pedal (right)
1
pedal (left)