Mighty Mule MMK200 Instructions D'installation

PRINTER'S INSTRUCTIONS:
INSTR,INSTL,MMK200 - NSC P/N: 10021997 A - INK: BLACK - MATERIAL: thin - SIZE: 11.000" X 17.00" - SCALE: 1-1
MMK200
Digital Keypad for
Automatic Gate Operators
Installation Instructions
1. OPERATION (FOR PROGRAMMING, PROCEED TO STEP 2)
This MMK200 Digital Keypad is designed for use with Mighty Mule automatic gate operators. The radio format provides unparalleled
security with more than a million different codes.
To activate the garage door opener, the user enters their unique 1 to 6 digit long code on the unit's keypad and presses the (
For up to 30 seconds after the last activation, the keypad can be re-triggered by simply pressing the (
user to stop or reverse the opener quickly, without having to re-enter their code.
The keypad has built-in lighting for use at night or in dark areas. The clear silicone keys are backlit with a pleasing blue glow. Pressing any
key will activate the backlight.
The keypad lockout timer will disable the keypad after 10 unsuccessful activations. The keypad must remain idle for 30 seconds before
new attempts.
The Mighty Mule gate operator contains a built-in receiver that is
programmed by sending a signal from the keypad. This stores the keypad's
code into the receiver's memory. The receiver will retain its memory even
without power and will only activate from the "memorized" keypad.
PACKAGE INCLUDES
3 AAA batteries included.
KEYPAD
MOUNTING SCREWS
SCREW ANCHORS
2. PROGRAMMING A KEYPAD CODE TO THE OPENER
On the control board, press and hold the Learn (
1
[beside the ( ) button] illuminates and the buzzer sounds. Release the
( ) button.
2 2
While the LED2 button is lit, enter a 1-6 digit
code into the keypad. Then PRESS and
HOLD the keypad's START/STOP key until the
opener BEEPS and the light BLINKS once.
Repeat Steps 1 & 2 for any additional keypad codes.
DELETING A KEYPAD CODE
Enter the 'Learn Transmitter' mode following Step 1
above.
Press and hold the (DOWN arrow) button until LED1,
2 & 3 flash and the buzzer sounds. (Approximately
10 seconds.)
Printed in China for Nortek Security and Control.
• Compatible with Mighty Mule
automatic gate operators:
271, 272, 371W, 372W, 571W
and 572W
• Supports up to 25 user codes
) button again. This allows the
KEY FEATURES
TEN KEYS ENTERING
1-6 KEYPAD CODES
USING NUMBERS OR LETTERS
SOFT BLUE LIGHTS
ILLUMINATE THE KEYS
FOR NIGHTTIME USE
UP/DOWN ( ) BUTTON STAYS ACTIVE FOR
30 SECONDS AFTER A CODE IS USED SO THE
OPENER CAN BE STOPPED OR REVERSED
) button until LED2
1
UP
S2
LEARN
S3
S4
DOWN
Copyright © 2019 Nortek Security & Control, LLC.
WALL MOUNTING
DRIVE THE PROVIDED SCREW
1
INTO THE MOUNTING SURFACE
(NOT ALL THE WAY).
) button.
ALIGN THE SCREW WITH
2
U-SHAPED SLOT ON THE BACK
OF THE UNIT, INSERT AND SLIDE
DOWNWARD UNTIL SECURE.
ADJUST THE SCREW DEPTH IF
NEEDED.
THE KEYPAD SHOULD BE
3
MOUNTED IN CLEAR VIEW OF
THE DOOR.
CHANGING BATTERIES
REMOVE ONE SCREW THEN REMOVE
1
THE BATTERY CRADLE.
INSTALL 3 FRESH AAA BATTERIES
3
INTO THE CRADLE.
MIGHTY MULE LIMITED WARRANTY
This product is warranted to the consumer against defects in material and workmanship for one year from the date of purchase. This warranty applies
to first retail buyers of new devices. Mighty Mule will repair, or at its option, replace, any device it finds that requires service under this warranty, and will
return the repaired or replaced device to the consumer at the Might Mule's cost. For warranty service and shipping instructions contact Mighty Mule Tech
Service. Devices must be sent to Mighty Mule for service at owner's expense. The remedies provided by this warranty are exclusive. Implied warranties
under state law are to the one year period of this written warranty. Some states do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you. In order to be protected by this warranty, save your proof of purchase and send copy with equipment should repair
be required. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact Mighty Mule Technical Services at 1-800-543-
1236 for an RPA# and other important details.
Press
LEARN (S3)
button
For more information on Mighty Mule's full line of Garage Door Openers, Gate Openers and Access
Mighty Mule® is the retail brand of Nortek Security & Control, LLC.
3121 Hartsfield Road • Tallahassee, FL 32303
10021997 A
KEEP BATTERIES OUT REACH OF CHILDREN. Swallowing batteries can
lead to serious injury or death. If you suspect someone has swallowed a
battery, go to the hospital immediately. Do not induce vomiting or eat or
drink anything.
For more information, call the National Battery Ingestion Hotline: 202-
USE THE ANCHOR
625-3333.
SUPPLIED IF REQUIRED
The battery identification number for this product is AAA Alkaline (LR03).
KEYPAD OPERATION
DAYTIME OPERATION
1
ENTER THE KEYPAD CODE
2 PRESS
1-6 DIGIT KEYPAD CODE THAT
WAS ENTERED INTO OPENER
NIGHTTIME OPERATION
1
PRESS THE LIGHT ( ) BUTTON (TO LIGHT KEYPAD)
2
ENTER THE KEYPAD CODE
3 PRESS
1-6 DIGIT KEYPAD CODE THAT
WAS ENTERED INTO OPENER
REMOVE THE OLD BATTERIES FROM
2
OVERHEAD LIGHT OPERATION
THE CRADLE, AND DISPOSE OF THEM
1
PROPERLY. ENTER USER KEYPAD CODE
2
PRESS ( ) BUTTON
NOTE: The overhead light cannot be operated from
the keypad unless the door is open.
WARNING: Changes, modifications or adjustments not expressly approved
by Nortek Security & Control could void the user's authority to operate this
equipment. There Are No User Serviceable Parts.
REPLACE BATTERY CRADLE AND
4
NOTICE: This device complies with Part 15 of the FCC Rules. Operation
SECURE THE SCREW.
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device complies with Industry Canada License-exempt RSS standards.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Mighty Mule Sales: 800-543-4283 • Fax 850-575-8912
Mighty Mule Technical Service 800-453-1236
Controls visit www.mightymule.com
WARNING