Important Notice - PRESIDIUM 999 2845 Mode D'emploi

IV. IMPORTANT NOTICE
• Keep the tester dry. Precipitation and all types of
liquids or moisture can contain minerals that will
corrode electronic circuits. If your tester gets wet,
remove the battery, and allow the tester to dry
completely before replacing it.
• Do not use, store or expose the gauge in dusty and
dirty areas. Its moving parts can get damaged.
• Do not use, store or expose the gauge in hot areas.
High temperatures warp or melt certain plastics.
• Do not use, store or expose the gauge in cold areas.
When the gauge returns to its normal temperature,
moisture can form inside the gauge.
• Do not attempt to open the gauge other than as
instructed in this handbook.
• Do not drop, knock, or shake the gauge. Rough
handling might break the fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the gauge.
• Do not paint the gauge. Paint can clog the moving
parts and prevent proper operation.
If your gauge is not working properly, kindly contact
Presidium Customer Service at service@presidium.com.
sg or:
Presidium Instruments Pte Ltd
No. 6 Penjuru Lane
Singapore 609187
Singapore
(65) 6379 5000
Attn: Customer Service Executive
8