Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
1.
Place the unit on a flat and stable work surface. Be sure unit is fully assembled
(see Assembly Instructions, page 3).
2.
Make sure the Switch is in the "OFF" (O) position.
3.
Insert plug into standard 120 Volt electrical outlet, rated 15A minimum.
4.
Place a wide, shallow bowl or plate beneath the
Grinder Head to catch ground food.
5.
Press Switch to "ON" (I). Always have the unit
running before adding food.
6.
Cut food into strips or cubes slightly smaller than the
Hopper opening.
7.
Place food into the Hopper and use Pushrod to
gently feed food into the Feed Screw. Do not force
food into the Grinder Head and NEVER use fingers
or other tools, other than recommended by appliance
manufacturer, to feed food into Grinder Head.
8.
If the motor slows or stops, this may be due to jammed food. See
instructions below for clearing jammed foods. IMPORTANT - NEVER PUT
YOUR FINGERS INTO THE FOOD HOPPER OPENING WHILE UNIT IS
OPERATING OR PLUGGED INTO ELECTRICAL OUTLET.
9.
When you have finished grinding food, press Switch to "OFF" (O), unplug from
electrical outlet and follow cleaning instructions.
How to clear Jammed Foods
1.
If the motor slows or stops, press Switch "OFF" (O) immediately.
2.
Press the Switch to the REVERSE position for several seconds to clear
jammed food in the Grinder Head.
3.
Release the Reverse switch and try operating as usual.
4.
If motor slows or stops again, press Switch "OFF" (O) and unplug from electrical outlet.
Follow cleaning instructions to clear the jammed food completely.
All manuals and user guides at all-guides.com
4
Publicité
Table des Matières
