Publicité
Les langues disponibles
Les langues disponibles
Headphone socket, mini jack (3.5 mm)
LED to display operation or charging status
(refer also to the Synexis charger manuals)
On/off and volume control
Set button
Charging contacts
Lid of the battery compartment
Belt clip
Channel selector buttons
OLED display to indicate the channel, battery status, frequency and
channel lock function (on delivery with protective foil)
Mounting for strap
Battery compartment for two 1.5 V batteries or rechargeable NiMH-batteries
How to insert/replace the batteries
1.
Remove the belt clip
the lock-in position (see arrow in chapter "Controls and indicators"). Slide
down the lid
2.
Insert the supplied NiMH rechargeable batteries according to the polarity
marks. Before using the receiver for the first time, the rechargeable batteries
inside must be charged e.g. with the Synexis C8 or C10 charger. As an
alternative you can use two 1.5 V AA alkaline batteries.
3.
Close the battery compartment
4.
If the receiver is not being used for weeks or months, please remove the
batteries. Batteries can leak when not being used for a long time and damage
the device.
How to operate the receiver
1.
Connect a beyerdynamic headphone with mono or stereo mini jack plug to
the headphone socket
2.
Switch on the beltpack receiver by turning the control
right.
3.
The LED
will illuminate:
blue, when a transmitter is turned on and reception available.
red, when there is no transmitter turned on or no reception available.
4.
Use the control
5.
The selected channel and the battery status are displayed
the receiver is operated on the same channel as the transmitter. If you wish
to select a different channel use one of the two channel selector buttons
to select the requested channel. If you release the channel selector button
the channel will automatically be stored after approx. 3 seconds. If you would
like to lock the selected channel to avoid accidental shifting, hold down the
All manuals and user guides at all-guides.com
by levering out the clip with pressure to the rear from
to open the battery compartment
by sliding the lid
.
to set the requested volume by turning it more clockwise.
.
to the top.
clockwise to the
. Make sure that
6 | 7
,
Publicité
