WARNINGS, CAUTION &
LEGAL INFORMATION
To reduce the risk of fire or electric shock, do not expose
the Braven Earbuds to rain or moisture while charging.
The Braven Earbuds should not be exposed to dripping
or splashing, and objects filled with liquids, such as vases,
should not be placed on or near it while being charged or
charging other devices. As with any electronic products,
use care not to spill liquids into any part of the product.
Liquids can cause a failure and/or a fire hazard. The power
supply must be used indoors only. Make no modifications
to the product or accessories. Unauthorized alterations may
compromise safety, regulatory compliance, and system
performance, and will void the warranty. Do not place any
flame sources, such as lighted candles, on or near the
BRAVEN Earbuds. The BRAVEN Earbuds contains small
parts that may be a choking hazard and is not suitable for
children under age 3. Do not continue charging the battery
if it does not reach full charge within the specified charging
time. Overcharging may cause the battery to become hot,
rupture, or ignite. If you see any heat deformation or leakage,
properly dispose of the battery. Do not attempt to charge
the battery in temperatures outside the range of 32°-104°F
(0°-40°C). If the battery begins to leak, do not allow the liquid
to come in contact with your skin or eyes. If contact has been
made, wash the affected area with plenty of water and seek
medical attention immediately. Do not expose the product or
econds
battery to excessive heat, including direct sunlight or fire and
econds.
storage or use inside cars in hot weather, where it can be
exposed to temperatures in excess of 115°F (60°C). Doing
so may cause the battery and power supply to generate
button
heat, rupture, or ignite. Using the product in this manner
d).
also may result in a loss of performance and a shortened
ooth
life expectancy. Extended exposure to direct sunlight may
®
damage the external appearance and material qualities. Do
not step on, throw, or drop batteries or the power supply or
device, or expose them to a strong shock. Do not pierce,
crush, dent, or deform the batteries or power supply in any
o a wall
way. If either becomes deformed, properly dispose of it. Do
the
not short-circuit batteries. Do not attempt to service the
rge
BRAVEN Earbuds yourself. Opening or removing covers may
expose you to dangerous voltages or other hazards and will
n battery
void the manufacturer's warranty. To prevent risk of fire or
electric shock, avoid overloading wall outlets, extension cords,
3
4
BRAVEN_FLYE-Sport-Earbuds_English-French_MANUAL_v11.indd 4
All manuals and user guides at all-guides.com
or integral convenience receptacles. Your Bluetooth device
(mobile phone, music player, tablet, laptop, etc.) must support
the A2DP Bluetooth profile in order to work wirelessly with
your new BRAVEN Earbuds. The A2DP profile is supported by
most recent mobile products with built-in Bluetooth capability.
Please refer to your device's user manual for details and
instruction regarding the Bluetooth profiles it supports.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:—Reorient or relocate the receiving antenna. —
Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. — Consult the
dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
FCC RADIATION EXPOSURE STATEMENT: This device
complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions:
ENGLISH
Full manual and troubleshooting: braven.com/manuals
11/21/16 5:29 PM