Sony VAIO PCGA-DDRW2 Mode D'emploi page 25

2
Pull the tray out fully until it stops. While supporting the tray
from the other side with your hand, place the disc on the hub
in the center of the tray.
Make sure that the disc audibly clicks into place and is firmly seated.
Notes
• Do not touch the lens assembly in the tray or the metal section on the rear.
• If you close the tray while the disc is not properly seated, the disc may be damaged
and the tray may jam.
Disc
3
Close the disc tray by gently pushing it in.
While data is being read, the BUSY indicator flashes.
BUSY indicator
Hub
Continued on next page
GB
25