Hive Hub 360 Manuel D'utilisation page 5

Hive Hub 360 lights and what they mean:
Colour
WHITE
BLUE
BLUE
AMBER
GREEN
PURPLE
PURPLE
RED &
AMBER
Remember
For your Hive devices to work correctly your Hive Hub 360 must be kept plugged in and
switched on. Must only be used with the power supply and cable provided.
Usage
Your Hive Hub 360 is designed for UK and Ireland household wiring, and for indoor use only.
Power supply – Input: 100~240VAC 50/60Hz. Output: 5.0VDC 2.5A. The distance between
user and device should be no less than 25cm.
Maintenance
Disconnect your Hive Hub 360 before cleaning and keep it away from water and other liquids at
all times. The Hive Hub 360 does not contain any serviceable parts so do not attempt to open it.
324_Hive_Hub360_UG_97x100_EU_AW.indd 6
Pattern What does this mean?
Breathing / Start-Up
Flashing
Spinning Set-Up
Solid Bluetooth Timeout
Double Hive Device Pairing
Flashing
Slow Flashing Hub Updating
Single Hub Muting/Unmuting
Slow Flash
2 x Solid Hub Muted
(Next to Mic)
Flashing Recovery Mode
Notes
DO NOT DISCONNECT. Hive Hub 360 is starting
up for the first time. This may take a few minutes.
Follow the instructions in the Hive app to set up
your Hive Hub 360.
Reboot Hive Hub 360 by powering off and then
back on again.
Hive Hub 360 is looking for Hive devices to pair.
DO NOT DISCONNECT. Hive Hub 360 is updating.
Hive Hub 360 sound monitoring is turning
off/on.
Hive Hub 360 sound monitoring is turned off.
DO NOT DISCONNECT. Hive Hub 360 is restoring
to its original factory settings.
29/03/2018 13:52