Step 4
Installing the right side and door handles
:
1 Align the 7 mm screws (M5) on the lower edge of the right side (M2) with the holes in the cross braces on the stand
body (M1), then attach the right side. Secure the right side (M2) to the stand (M1) body using two of the 28 mm side
support screws (M12) provided.
2 Install the two cabinet door handles (M10) onto the cabinet doors with the four 22 mm screws (M9) provided.
You'll need:
M12 (2)
www.insigniaproducts.com
NS-HWMG1754G / NS-HWMG1754M / NS-HWMG1754M-C
M12
M9
M9
M9 (4)
M10 (2)
M12
M10
M2
9