senya SYCP-HB009 Notice D'utilisation page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3- Press the
4- At the end of the programme, the appliance will beep and the screen will display
« END ». Your mixture is ready to be enjoyed.
Note:
This programme does not have an automatic mixing function.
-
You can interrupt the operation at any time by pressing the
-
switches to standby mode.
The « keep warm » setting is a 20-minute programme allowing previously-cooked mixtures to
be kept warm.
1- Press the
2- Press the
indicating that the operating time is 20 minutes.
3- Press the
4- At the end of the programme, the appliance will beep and the screen will display
« END », indicating the cycle is completed.
Note:
During this programme, it is quite normal for the appliance to make a noise, blend
-
the food several times and small jets of steam to escape from the appliance.
You can also interrupt the programme at any time by pressing the
-
appliance switches to standby mode.
The « pulse » setting allows you to blend mixtures to the extent required for a further 30
seconds without additional cooking. This setting can be used to obtain a desired consistency
or grinding almonds or hazelnuts.
1- Press the
the maximum blending time in hand-press blend mode is 30 seconds.
2- The timer on the screen will count down. After 30 seconds the appliance will beep
and 'END' will display on the screen, indicating the cycle is completed.
Remarque :
This programme does not have an automatic mixing function.
-
To stop blending at any time, simply release the button
-
Hints and tips:
button again. The programme will start automatically.
button to switch on the appliance.
button. This button will flash and 'P20' will be shown on the screen,
button again. The programme will start automatically.
button and hold it down. The screen will show 'F30', to indicate that
Keep warm mode
Pulse mode
21
button. The appliance
button. The
.

Publicité

Table des Matières
loading

Table des Matières