Monitors Connection; Pcs Connection; Auto Power Off; Power Management - Denver NVI-450 Manuel D'utilisation

Ope r a t i n g In s t r u c t i o n s Pow e r M anag em e n t
【Monitor Connection】
 Connect monitor to video Output Interface.
 Long press #15 for 3 seconds to switch the
display on the screen of external monitor.

【PCs Connection】

 The viewer is equipped with USB2.0 interface.
 The PC could identify the viewer automatically
and read the content in the SD card.
 The battery could be charged by connection of
PCs.

【Auto Power Off】

 The viewer will be turned off if there is not any
operation within 3 minutes except in video shooting
and playback mode.

DENVER NVI-450 DENVER NVI-450
18 17
【Battery Application】
 Model: 14500，800mAh，3.7V.
 Please ensure the battery should be charged 10
hours to make it works best in the first time.
【External Power】
 Plug the DC IN 5V in.
 The viewer could work for long time and won't
be powered off automatically.
 The viewer could be charged when the external
power connected well.