Table des Matières
Publicité
STEP 2 Plug one of the supplied power adapters into a power outlet, then plug
the loose end of the power cable in the back of the transmitter. The light atop
the transmitter will blink red three times to indicate that it has power, then starts
blinking blue (searching for the headset).
STEP 3 Please make sure the headset is within range of the transmitter (up to 30ft).
Turn on the headset by pressing the power button on the right side of the headset
and hold it down to start the pairing process (see page 6 to locate the power
button). The headset and transmitter are pre-paired and will connect automatically
within 15 seconds. The transmitter light will turn solid blue when the headset is
connected.
WHAT THE TRANSMITTER LIGHT MEANS:
Blinks red and turns off –transmitter off
Steady blue – headset connected
Blinking blue – searching for headset or headset out of range
Steady purple – headset off
5
Publicité
Table des Matières
