Important Precautions - LG UltraGear 24GQ50F Manuel D'utilisation

Masquer les pouces Voir aussi pour UltraGear 24GQ50F:
Table des Matières

Publicité

IMPORTANT PRECAUTIONS

Please read these safety precautions carefully before using the product. All precautions and
safety information applies to LCD and OLED models.
WARNING
Failure to follow those warnings may result in death, serious injury or damage to the product or other
property.
Precautions to the AC Adapter and Electrical Power
WARNING
If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter),
y
y
disconnect the power cord immediately and contact the service center.
» Otherwise, this may cause a fire or electric shock due to damage to the product.
Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty,
y
y
wipe and dry them before use.
» Otherwise, this may cause a fire or electric shock.
Make sure to completely insert the power cord into the AC adapter.
y
y
» If loosely connected, the poor connection may cause a fire or electric shock.
Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.
y
y
» The use of non-approved products may cause a fire or electric shock.
When unplugging the power cord, always pull it by the plug. Do not bend the power cord with
y
y
excessive force.
» The power line can be damaged, which may cause electric shock or fire.
Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord
y
y
or AC adapter. Be careful not to damage the power cord or AC adapter with sharp objects.
» Damaged power cords may cause a fire or electric shock.
Never disassemble, repair or modify the power cord or AC adapter.
y
y
» This may cause a fire or electric shock.
Use only the power cord supplied with the unit or another manufacturer's authorized cord.
y
y
» Failure to do so may result in fire or electrical shock or damage to the product.
Use only a properly grounded plug and receptacle.
y
y
» If you do not you may be electrocuted or injured. Or the product might be damaged.
Do not use a damaged or loose plug.
y
y
» This may cause electrical shock or fire.
Operate the display only from a power source(i.e. voltage) indicated in the product specification.
y
y
» Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of
power supply you have, consult a certified electrician.
In the presence of thunder and lightning, never touch the power cord and signal cable because it can
y
y
be very dangerous.
» It can cause electric shock.
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet.
y
y
Use a power bar with a grounding terminal designed for exclusive use with the computer.
» A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust,
y
y
dry the power plug completely or wipe dust off before plugging in the cord.
» You may be electrocuted due to excess moisture.
If you don't intend to use the product for a long time, unplug the power cable from the product.
y
y
» Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
Insert the power plug firm so it cannot come loose.
y
y
» A loose connection can cause fire.
Important precautIons
1

Publicité

Table des Matières
loading

Table des Matières