Functional Diagram; Keypad Id Setting; Pairing With Watch Pager; Call Function (1-12) - Retekess TD029 Manuel D'utilisation

Functional Diagram

Antenna
Display area
CALL Key
PROG Key
CLEAR Key
PGR Key
Keypad ID Setting (F1, 1-999)
The three digits displayed on the screen after connecting the power supply is the keyboard ID.
1.In the Call Mode, press "PROG" button to enter the setting mode, F1 is displayed on the screen.
2.Press "PROG" button to enter the sub-menu, F. 0 is displayed on the screen
3.Enter the desired keypad ID through the keypad (1/2/3/4/5/6/7/8/9/10 are the valid keys, 10 represents 0)
4.Press "PROG" button to save the setting, the keypad beeps at the same time.
5.Press "CLEAR" button twice to return to the call mode

Pairing with Watch Pager

1.When the watch pager in the standby state, press and hold (about 1s) "A " button to enter setting mode
2.Press the "A" or "B" button to select "Pairing"
3.Press and hold (about 1s) "A" button to enter sub-menu
4 Press the "A" or "B" button to select "Ket Pair"
1.Press and hold (about 1s)"A" button to enter sub-menu, it shows the Pager ID, Keypad Serial Number and the
status.
2.Press "B" button to move the edit position
3.Press "A" button to select the desired value (the value of the Pager ID could be selected from 001-999, and the
Keypad Serial Number could be selected from 01-50, "FFF" means that the Keypad Serial Number is not
registered and can be paired )
4.Press the corresponding Pager ID number on the keypad, the watch pager will vibrates and shows OK on the
display, the "FFF" will be changed to the Keypad ID. This pairing operation is completed.
NOTE:
The user needs to pair the keypad with the watch pager before using them, otherwise, the keypad will not be
able to page the watch pager.

Call Function (1-12)

In the Call Mode, press the Number key can page the corresponding watch pager. The number flashes on the
screen at the same time.
If you need to page the watch pagers with ID from 13 to 999
1.In the Call Mode, press "PGR" button to enter combined numerical call state , P.0 is displayed on the screen
2.Enter the desired number through the keypad (1/2/3/4/5/6/7/8/9/10 are the valid keys, 10 represents 0)
Press "CALL" button to confirm, the corresponding watch pager within the effective distance will receive the call.
NOTE:
1.Press "PGR" button can exit the combined numerical state and return to the call state.
2.The number flashes on the screen means the call is successful
01