Table des Matières
Publicité
o
o
o
a
o
ro
o
o
Shut the back
Prepare for the exposure
Cock and release tiil frame counter (6)
sho'tus " 7".
Reset shutter speed setting knob (19) to
automatic
Set the film speed
Lift setting ring (1) and" turn i,t till the
DIN or ASA ualue of gour fi,Im is mat-
ched usith the mark.
Select the F stop
with setttng ring (12).
Focus
Triple rangefi,nder uedge: The obiect is
sharp nshen its contours and lines are
not distorted.
Truncated microprisrn screen: At mari-
rnurn sharpness the object tuill be clear
and free from fl,icker.
Ground glass fi,eld: Thi,s ring is used in
poor light situations, €. g. tor close-ups;
the image must be clear and sharp.
Release
Press release (20) gentlg, the automatic
sEstem starts running and the LED indL-
cation signals the shutter speed. Release
if the speed fits gour subject, otherutise
change the diaphragrn ualue.
Film change
Press reuind
release (39), suiuel
out
reuind crank (3) and turn it tn the di-
recti,on of the arrou) till a sudden change
in easA rnoDen'Lent indicates that the
film
has slipped out of the sprocket
slot. Pull reusind, button (2) up to the
stop, open the back and take out the
cartridge.
O Lens change
Depress unlocktng
keg (10), turn
the
lens counter-clockttsise to the stop and
take it out.
lnsert the other lens so that the red
marks match, and turn i,t clockusise till
it locks.
{
I
r
20
Publicité
Table des Matières
