Publicité
Overview
Tools Included:
1. Seperate and Identify all parts.
2. Attach the Foot (P2) to the bottom of the Power Tower (P1) using two Screws (A)
as shown in the illustration above. Tighten the Screws using Allen Wrench (D).
3. Repeat Step 2 to install the other three Feet.
4. Screw in two Casters (B) into the bottom of two Feet (P2) as shown. Tighten Caster
using Caster Wrench (E).
5. Repeat Step 4 to install the two Locking Casters (C) as shown.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK-
UPDATED AS OF: 11/30/2018
P1
P2
A
C
B
USE ONLY INDOORS.
A
P2
C
4 of 5
Publicité
