Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Changing Modes (CATV to AIR)
CATV MODE
1.
Turn off the modulator power.
2.
Press and hold down the CH - button, switch the power on, and then
release the CH - button.
3.
The LED channel display will display the number 125 (on first
installation), the modulator is now in CATV mode. If you have set up
the modulator before, it will revert to the previously used channel.
AIR MODE
1.
Turn off the modulator power.
2.
Press and hold down the CH + button, switch the power on, and then
release the CH + button.
3.
The LED channel display will display the number .69 (on first
installation), the modulator is now in AIR mode. If you have set up the
modulator before, it will revert to the previously used channel.
SETUP
- 5 -
Publicité
Table des Matières
