Installing and Connecting
All manuals and user guides at all-guides.com
Plug power cord into the nearest outlet. Make sure the surface is dry (never place Airfree
wet floor or immerge it in water). Make sure side led light is on. Adjust the night light intensity
with the touch sensor. After 10 minutes the top lid should be warm.
Place Airfree
®
on a flat surface not exceeding 3' from the floor, not under furniture, shelves,
or behind curtains as it will reduce airflow and Airfree
Check if the area is compatible with the unit capacity to achieve best unit performance.
Airfree
®
must be continuously on in the same room, 24 hours a day.
Airfree
®
is to be used in rooms with minimum air volume of 330 ft
Airfree
®
can be installed in rooms equipped with air conditioning and heating systems.
However it is recommended not to place nearby to avoid potential interference in Airfree
air flow.
Airfree
®
can be placed in corridors but its air sterilization effects will barely have any effect in
connecting rooms.
Airfree
®
shall not be placed near doors or under windows to avoid sterilized air to exit the
room.
To change globe light colors press the sensor on the back of Airfree
to the next color. For the random mode please switch to pink and let it be. Maintaining finger
pressed on the sensor will increase or diminish brighteness.
To open Airfree
®
Lotus' petals, press the top lid centre.
To close the petals, move them simultaneously towards the centre.
®
efficiency in reducing microorganisms.
5
®
3
.
®
. Each touch will switch
on
E
n
g
l
i
s
h
®