Technical Data - Speaka Professional 1911201 Mode D'emploi

Receiver
1 HDBase T Out socket
2 RS232 socket
3 LAN socket
4 LAN socket
5 HDMI Out socket
6 Power connector Power 48V
Setup
a) HDMI connection
Example of a connection diagram
Transmitter
HDMI In
• Turn off all devices and disconnect them from the power supply before connecting each
component.
• It is supplied with rubber feet. If necessary, you can attach these to the bottom of the
receiver. Note that rubber feet can leave marks on sensitive surfaces. If necessary, place a
suitable base on the surface.
• Follow the instructions provided for your transmitter.
• Connect the output of the HDBaseT transmitter and the HDBase T In socket (1) to a CAT6a
network cable (RJ45). Observe the technical data to determine the length of the network
cable needed.
• On the RS232 socket (2), you can connect a PC or notebook that issues
commands via RS232 (such as turning on/off a compatible projector or
monitor). The delivery includes a RS232 Phoenix plug. Observe the
illustration opposite with the correct connections.
• Connect an HDTV / Monitor and the HDMI OUT socket (17) to the receiver with a suitable
HDMI cable.
• Connect the tab of the power adapter to the power connector Power 48V (6) and the mains
plug with a suitable mains socket. If an upstream transmitter already supplies enough
power via the network cable, it is not necessary to connect the power supply.
b) Brief description of the controls
Control Function
LAN socket
Connect Ethernet devices such as a router or computer. It also
serves as an Ethernet switch. The signals work bidirectionally.
HDMI Out socket Connect HD TV/Monitor.
Power connector Connection for the power adapter.
Power 48V
Interruptors of Switch for RS232 mode and Internet update of the internal
RS232 MODE and
manufacturer software.
CTRL / UPDATE
LED Power It indicates that the product is receiving power.
LED Link It indicates that the product detected an HDBaseT connection
(input and output).
LED Status
It indicates that the product is connected to an HDMI device.
IR In socket: Connection for the IR receiver.
IR Out socket: Connection for the IR transmitter (send).
Care and cleaning
• Disconnect the product from the mains before each cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
may damage the case or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
7 Interruptors of RS232 MODE and
CTRL / UPDATE
8 LED Power
9 LED Link
10 LED Status
11 IR In socket
12 IR Out socket
Receiver
CAT6a
RS232
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfil your statutory obligations and contribute to environmental protection.

Technical data

a) Receiver (RX)
Output voltage/current ...............48 V/DC 0.5 A
Bandwidth ..................................up to 18 Gbps
HDMI port ..................................Transmitter HDMI input, receiver HDMI output
Video resolution .........................1080p (network cable CAT6a with max. length of 100 m)
Compatibility ..............................HDCP 2.2, HDR
PoE output power ......................Bidirectional, RX to TX: max. 10.6 W
RS232 ........................................Bidirectional
HDMI Out
IR-transmitter/receiver ...............Bidirectional
Ethernet Interface ......................100 Mbps
HD TV
Operating temperature ..............0 to +55 ºC
Storage temperature ..................-10˚C to +70˚C
Operating/storage humidity .......5 - 90% relative humidity
Dimensions (L x W x H) .............143 x 98 x 13 mm
Weight .......................................approx. 290 g
b) Power adapter
Input voltage/current ..................100 - 240 V/AC 0.5 A
Output voltage / current .............48 V/DC 0.5 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
4K 60 Hz 4:4:4 (network cable CAT6a with max. length of 70 m)
*1911201_v1_0819_02_hk_m_en(2)