Xrocker 2.1 Stereo Wireless Mode D'emploi page 8

Issue
No power going to control panel
No sound
The cables connected to my
X Rocker have been broken
accidentally
8
• Make sure that the power cable is
connected correctly.
• Make sure that the power supply at the
power source is working correctly.
give the power cable a slight wiggle in the
then please contact support (details below).
• Make sure that the wireless channel
(1,2,3 for wireless and AUX for wired
• Please make sure that the volume of
the source device is at a higher level to
strengthen the audio signal.
• Please contact X Rocker support
(service@acecasual.com) regarding
this issue.
• In this case, try another of the three
wireless bands to isolate the signal.