Philips PowerPro Aqua Mode D'emploi page 9

English
10
Problem
FC6409: The mini turbo
brush does not function
properly.
FC6409: I cannot connect
the mini turbo brush to the
appliance.
Possible cause
The roller brush is blocked.
The roller brush is blocked by
fabric or surfaces during
cleaning.
The mini turbo brush is not
fully closed.
The connector between the
mini turbo brush and the
appliance is not placed
properly.
The connector between the
mini turbo brush and the
appliance is not present.
Solution
Remove hairs from the brush with a pair
of scissors (see user manual).
Keep the mini turbo brush aligned with
the surface and do not push the turbo
brush into soft surfaces.
Make sure that the top and bottom parts
of the mini turbo brush are properly
connected and there is no gap between
the two parts. Check if the locking ring is
in closed position (see user manual).
Make sure that the connector is pushed
into the mini turbo brush as far as it
goes.
You can remove the connector from the
mini turbo brush, for instance for
thorough cleaning, but you cannot
connect the mini turbo brush directly to
the appliance without the connector. To
reassemble the mini turbo brush, first
push the connector into the mini turbo
brush as far as it goes and then push the
connector into the nozzle of the
handheld vacuum cleaner.