SD-Card operation
1.
Press the FUNCTION /
2.
Insert SD-Card into the card slot. "READ" is displayed as the system scans the contents of SD card.
3.
Track no. 1 of root folder (Folder 1) will be playback automatically after finish reading SD card
contents.
4.
Press FF /
or FR /
5.
Press and hold FF /
6.
Press PRESET + /
7.
Press STOP /
to stop playback.
NOTE
•
USB connector does not support connection with USB extension cable .
•
This unit is not designed for communication with computer directly.
•
Not all USB memory devices and SD cards will be compatible with this audio system
IMPORTANT – Do not disconnect the USB device during USB mode, as this may damage the external device
or its files. Please power off first or press another Mode before safely disconnecting the USB device.
USB Specification:
•
USB 2.0 Full speed, HOST (USB HUB is not supported) Corresponding Flash memory
•
Compatible with MPEG Audio 1, 2, 2.5
•
Compatible with Layer 1, 2, 3
•
Compatible with Bit rate: 128 – 320 Kbps
•
Subfolder nest : 8 levels
•
Number of track / titles ; max 999
•
Support ID3 tag V2.0
CD PLAYER
Playing a CD
1.
Press the FUNCTION /
2.
Press CD OPEN / CLOSE /
3.
Insert a disc with the printed side facing up. Press CD OPEN / CLOSE /
compartment, READ is displayed as the CD player scans the contents of a disc.
OPERATION
button to set the unit to CARD mode.
once or repeatedly until the desired track number appears in display.
or FR /
to move within the track currently playing.
or PRESET – /
to select desired album.
to set the unit to CD mode.
to open the CD compartment.
- 15 -
again to close the