Duramaxx 10022714 Mode D'emploi page 23

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6.
Press button 7 on the remote control to stop recording.
7.
Press button 1 on the remote control to play the recording back.
8.
Press button 4 on the remote control to manage your recordings. Alternatively, you
may also press „Play Video" on the screen. Note: The recording system sometimes
requires 10 -20 seconds to calibrate. Therefore, let it run for at least 20 seconds if you
would like to record something. The maximum size of the storage medium is 8 GB.
Recording Duration
During recording, the screen shows the recording time and the maximum recording time
(up to 3 hours). Press „Setup" to set the maximum recording (1 - 180 minutes). Standard
setting is 60 minutes. When the recording exceeds 60 minutes, the system will create a
new recording file.
LED Indicators
1.
REM: remote receiver
2.
Power: indicates that the device is turned on
3.
Recording: blinks during recording
4.
USB: indicates that a USB memory device is
connected
5.
Error: system or USB memory device failure
6.
IR: flashes when the remote control is used
Scheduled Recording
You may also schedule a recording in advance. Simply select a scheduled recording in the
setup menu. The device will ask for the desired time of the recording start. This setting is
only valid once. For following recordings it must be set again.
Video format: The resolution is 640 * 480. Videos need about 500MB per hour.
Audio Recording: A microphone on the control panel allows you to record your voice simul-
taneously while recording a video.
Compatible video formats
• Divx3.11 / DivX4 / DivX5 / MPEG1 / MPEG2
• MPEG4 (MPEG4 video file format: AVI, M4V, MPG, MPEG)
Note: The video player of the unit does not support some downloaded videos.
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1002271510022716

Table des Matières