5.
Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
6.
This product is not a toy. Keep it out
of reach of children.
7.
Have this product serviced by a quali-
fied repair person using only identical
replacement parts. This will ensure
that the safety of the product is main-
tained.
7.
Wear ANSI-approved safety goggles
during use and service.
8.
WARNING: This product contains
or, when used, produces a chemi-
cal known to the State of California
to cause cancer and birth defects or
other reproductive harm. (California
Health & Safety Code § 25249.5, et
seq.)
6.
The warnings, precautions, and in-
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
saVe these
instructions.
SKU 98041
For technical questions, please call 1-800-444-3353.
All manuals and user guides at all-guides.com
grounded tools: tools with three
1.
grounding
to preVent
electric shock
and death From
incorrect grounding
wire connection:
Check with a qualified
electrician if you are in doubt
as to whether the outlet is
properly grounded. do not
modify the power cord plug
provided with the tool. never
remove the grounding prong
from the plug. do not use the
tool if the power cord or plug
is damaged. if damaged, have
it repaired by a service facility
before use. if the plug will not
fit the outlet, have a proper
outlet installed by a qualified
electrician.
prong plugs
Tools marked with "Grounding Re-
quired" have a three wire cord and
three prong grounding plug. The
plug must be connected to a properly
grounded outlet. If the tool should
electrically malfunction or break
down, grounding provides a low
resistance path to carry electricity
away from the user, reducing the risk
Page 3