GINGKO Music Click Clock Mode D'emploi page 5

ALARM SETTING INSTRUCTIONS
(This clock can be set with 3 different alarms; and each alarm can be set with "normal alarm mode" or "week day alarm mode")
' - - :AL ' - Normal alarm mode: the alarm will go off 7 days a week
' - : AL ' - Week day alarm mode: the alarm will go off on week days only

Press the DOWN button to access the alarm setting when it's in normal display and the clock will initially be on showing "- AL" ,
press UP and DOWN to choose the alarm mode you want to set, then press SET to confirm and it will bring you to the first
alarm setting screen

the first alarm is initially turned off with display '- -:A1' (to turn alarm on press UP button to show '0:00') To turn OFF press
DOWN button.

To set the first alarm, press SET when it's displaying "0:00", the hour section will flash and then press UP and DOWN buttons to
adjust the hour; press SET again, the minute will flash and press UP and DOWN to adjust minute.

After adjusting time, press SET again. It will go to the second alarm time, initial display will be '- -:A2' (to turn alarm ON press
UP button to show '0:00') To turn off press DOWN button. Follow the same instructions as above to set your second alarm
time. (If you don't want to set the second alarm, just continue to press SET button to access the third alarm setting screen.)

After pressing SET, it will go to the third alarm showing initial display '- -:A3' (to turn alarm ON press UP button to show '0:00').
To turn OFF, press DOWN button. Follow the instructions as above. After finishing setting the three alarms, press SET it will go
back to normal display. (If you don't want to set the second alarm, just continue to press SET button to exit the alarm settings
and the clock will go back to normal display)
When one of the alarms is being set and turned on, there will be a dot under the right side of minute display area which indicates at
least one alarm has been turned on.
SOUND ACTIVATION FUNCTION INSTRUCTIONS
The sound sensitive function can be turned off so the time can display continuously without going off. However, to save more energy
it's suggested to have this function turned on.

To turn sound activation function ON, press the 'V/S' button. When clock displays 'ON:Sd' , the sound activation function is ON.
In this mode, the clock display will switch off automatically after 20 seconds, but it will light up instantly when you click your
fingers, clap your hands or give a gentle tap on top of it.

Press the V/S button again for the clock to display '- -:Sd', means this function is turned OFF.
In this mode, the clock display will be continuously on without going off.
SNOOZE FUNCTION INSTRUCTIONS

The clock comes with a snooze function. The snooze time is 5 minutes each time and it can be snoozed maximum of 5 times.

The snooze function will be turned on automatically when the clock is powered

When the alarm is sounding, pressing any clock setting buttons (SET, UP, DOWN, V/S) will stop the alarm and it will sound again in 5
minutes time.

Pressing any clock setting buttons twice when the alarm is sounding can turn off the snooze function. The alarm won't sound again
until the next day.
All manuals and user guides at all-guides.com