V-TAC 80133970 Instructions D'installation page 2

3. TO START
1. Screw the stake firmly onto the socket outlets housing.
2. Insert the garden spike into the ground firmly so the unit is securely
fixed vertically.
3. Plug in the power cord making sure it is protected from water ingress.
4. USING THE TIMER
• For manual override set switch to (ON)
• For automatic timer settings set switch to
• Rotate the timer wheel clockwise until the current 24hr time is set to the
arrow (Refer to FIG 2)
TIMER DIAGRAM:
1.Pull segments to OUTER edge for ON(Segments in 15min increments)
2.Push segments to INSIDE edge for OFF
FIG2
WARNING
Please make sure to turn off the power before starting the installation.
Caution, risk of electric shock.
This marking indicates that this product should not be
disposed of with other household wastes.
Mode Switch
Always-on mode(Timer disabled)
Timer mode
Arrow pointing to Current Time
ENGLISH ENGLISH
OUTER EDGE
closes contact for POWER ON
INSIDE EDGE
opens contact for POWER ON