Haverland IGLU UV Manuel D'instructions page 24

6. INTRODUCTION ON HOW TO OPERATE THE UNIT
Before starting to operate the unit:
1) Find a place where there is power supply nearby.
2) As shown in Fig.2 and Fig.2a, install the exhaust hose, and adjust the window position well.
Fig.2 Fig.2a
3) As shown in Fig. 2, connect drain hose well (only for using heating model)
4) Insert the power cord into an grounded AC220~240V/50Hz socket;
5) Press the POWER button to turn on the air-conditioner.
1.Before using
Notice:
- Operation temperature range:
Maximum cooling Minimum cooling
DB/WB(ºC) 35/24 18/12
Check whether the exhaust hose has been mounted properly.
Cautions for cooling and dehumidifying operations:
- When using cooling and dehumidifying functions, keep an interval of at least 3 minutes between each MODE.
- Power supply meets the requirements.
- The socket is for AC use.
- Do not share one socket with other appliances.
- Power supply is AC220-240V/50Hz
2. Cooling operation
- Press the "Mode" button till the "Cool" icon appears.
- Press the " "or " "button to select a desired room temperature. (16ºC - 31ºC)
- Press the "Fan Speed" button to select wind speed.
3. Dehumidifying operation
Press the "Mode" button till the "Dehumidify" icon appears .
- Automatically set the selected temperature to current room temperature minus 2ºC.
- Automatically set the fan speed to LOW wind speed.
4. Fan operation
- Press the "Mode" button till the "Fan" icon appears.
- 6 -