Panasonic CQ-C8803U Manuel D'instructions page 13

The following functions are activated when the Security
Function is ON. (a page 32)
¡ The security indicator lights up when removing the
face plate.
Security Indicator
You may need to set the following depending on the
devices to be connected.
Using Subwoofer
¡ Subwoofer level adjustment
¡ Subwoofer low pass filter (a
Connecting an AV device (TV, VTR)
If you connect TV to AUX1 terminal, set the AUX1 setting
to TV.
1
Press [SRC] (Source) to select the
AUX1 mode.
(a page 16)
2
Press [MENU] to display the menu display.
For using the remote control, hold down [MENU]
for 2 sec. or more.
Note: Adjust the clock when "ADJUST" appears on the
display.
1
Press [MENU] to display the menu
display.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
2
Press []] or [[] to display the
DISPLAY menu.
3
{
Press [ ] to select "CLOCK ADJ".
4
Press [BAND] (SET) to confirm the
display.
¡
3
(a page 31)
page 31)
4
Note: Other settings are required when a Sirius receiver,
an XM receiver, or a Hands-Free Phone System is
connected.
5
6
7
The alarm sounds and the message appears on the
screen to warn you to remove the face plate at ACC
off.
Press [BAND] (SET) to adjust.
: For connection of other than a TV (default)
: For connection of a TV
Press [MENU] to confirm the adjust-
ment.
(a System Upgrade Guidebook)
Adjust the setting value.
[[]
: Adjusting minutes
[]]
: Adjusting hours
}
[ ]
: Forward
{
[ ]
: Backward
Press [BAND] (SET) to confirm the
adjustment.
Press [MENU].
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
CQ-C8803U
13