Preparation - Pleasant Hearth L-24 Mode D'emploi

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 5 minutes
No Tools Required for Assembly
ASSEMBLY INSTRUCTIONS
1. The log set (A) can be installed in several ways,
either into an existing fireplace, on a solid floor
up against a solid wall, or into any opening that
meets the instructions and warnings in this manual.
Simply insert the jack on the adaptor (B) into the
socket located on the bottom of the log set (A) and
place the log set (A) in the desired location,
observing the clearances and notes in this manual.
Plug the adaptor (B) into a 120-volt electrical outlet.
WARNING: Do not install unit on carpeting,
rugs, beds, blankets, pillows, etc. Keep
combustible materials such as furniture,
bedding, papers, clothes and curtains at
least 3 feet (914 mm) from the log set.
1
A
7
B