JVC KD-DV6101 Manuel D'instructions page 38

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Ex.: When "FAD" is selected
2
38
Indication pattern changes
as you adjust the level.
Indication
To do:
FAD*
1
Adjust the front
(fader)
and rear speaker
balance.
BAL
Adjust the left
(balance)
and right speaker
balance.
LOUD
Boost low and
(loudness)
high frequencies
to produce a well-
balanced sound at
low volume level.
SUB. W*
Adjust the
2
(subwoofer)
subwoofer output
level.
VOL. A*
3
Adjust and store
(volume
the volume level
adjust)
of each source.
VOL*
4
Adjust the
(volume)
volume.
*
1
If you are using a two-speaker system, set
the fader level to "00."
*
This takes effect only when a subwoofer is
2
connected.
*
You cannot make an adjustment if the source
3
is FM. "FIX" will appear.
*
4
Normally the control dial works as the
volume control. So you do not have to select
"VOL" to adjust the volume level.
*
5
Depending on the amplifier gain control
setting. (See page 41 for details.)
Range
R06
(Rear only)
to
F06
(Front only)
L06
(Left only)
to
R06
(Right only)
LOUD ON
J
LOUD OFF
00 (min.)
to
08 (max.)
–05 (min.)
to
+05 (max.)
00 (min.)
to
30 or 50
(max.)*
5

Publicité

Table des Matières
loading

Table des Matières