TrendGeek TG-24 Mode D'emploi page 13

MAINTENANCE
After using 5-6 times, or 2-3 days, please dean the product as follows.

Unplug the unit from mains supply and remove cover.

The inner part of the cover can be disassembled to dean.

Please install the inner part in place against loss after deaning.

Pour out any remaining water from the "DRAIN SIDE" of the tank.

Unplug power cord from base of unit.

Put 1 tablespoon of citric add in the water tank, add ju6t under 100ml of warm water (up to 7℃)

Leave far 5 minutes, and then drain solution from the "DRAIN SroE" of the tank.

Wipe wfth a soft doth. Avoid Ultrasonic Vibration plate area, which can be gently cleaned with a cotton bud.
Never use other acids, enzymes or detergents, as this may risk polaonoua gas to be creatad or cause
malfunction.
Cover has an inner cover that can also be removed for deaning.
1. Pull grip as indicated in the diagram to release.
2. After deaning inner cover, replace by holding grip, and pressing down inner and outer cover until "dick" is heard.
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
User Manual
AIR OUTLET
Aroma Diffuser