Cleaning And Maintenance; Technical Specifications - Velleman MOND2 Mode D'emploi

6. Operation
1. Connect the TV simulator to the power supply unit. Connect the power
supply to the mains.
2. Place the TV simulator near your real TV set.
3. Choose one of the functions:
ON
DUSK +4
HRS
DUSK +7
HRS
OFF
4. Disconnect the power supply from the mains after each use.
7.

Cleaning and Maintenance

The MOND2 does not need any particular maintenance. However, it is
advisable to clean it occasionally to keep it looking like new.
8.

Technical Specifications

LED colours
LED modes
power supply
input
output
dimensions
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 11/12/2015
permanently switched on
automatic switch off after 4 hours
automatic switch off after 7 hours
switched off
white, red, green, blue
random
100-240 V~, 50/60 Hz, max 350 mA
9 VDC - 1000 mA
85 x 57 x 75 mm
MOND2
5 ©Velleman nv