Publicité
Destructeur de papier HD1400MX
Au CANADA :
Cet appareil numérique n'excède pas les limites de Classe pour les émissions radio
bruyantes des appareils numériques présentés dans les Réglements d'Interférence
Radio du Département de Communications Canadien.
Enregistrez votre produit en ligne à:
Date de I'achat:
Lieu de I'achat:
Lote/Numero de serie:
Soutien à la clientéle
S'IL VOUS PLAÎT GARDER CETTE INFORMATION POUR VOS DOSSIERS
HD1400MX
L'enregistrement de renseignements sur le produit
Modèle:
1-800-272-6229 {US}
1-888-266-9380 {Canada}
01-800-849-4826 {Mexico}
9
ROYAL HD1400MX PAPER SHREDDER
Setup:
1. Make sure that the wastebasket is completely inserted into the shredder cabinet
and that it fits flush with the cabinet.
2. Plug the power cord into any standard 115-volt AC outlet.
3. Depress the ON/OFF
button. The READY LED should light up. You are now
( )
ready to start shredding.
Operating the shredder:
With the electrical cord plugged in, the ON/OFF
wastebasket properly in place, the LED will light up. This means that the shredder
is now ready for operation. When paper is inserted into the feed opening, the shredding
process will start automatically and stop when the paper has completed its travel
through the feed opening. Located on top of the shredder is the LED, REVERSE (<<)
and FORWARD (>>) button. Their purposes are:
1. When the ON/OFF
( )
button is pressed, the shredding process will start when
paper is inserted into the feed opening and will continue until it has passed through
the feed opening.
2. The REVERSE (<<) button is used to assist in the removal of a paper jam. It
reverses the shredding process prior to a completed forward cycle, thus clearing
the cutters. When switching from REVERSE (<<) to FORWARD (>>), always
allow the motor to stop to prevent possible damage to the motor.
3. The OFF
( )
position is used to terminate the AC power to the shredder. It is
recommended to turn the shredder off when the shredder is not being used for
a prolonged period of time.
4. When the READY LED is lit, it lets the user know that the wastebasket is inserted
correctly, the shredder is turned on and is now ready for use. If the LED does
not light up, make sure that the plug is plugged in, the basket is inserted
correctly and the ON/OFF
( )
button is depressed.
Shredder capacity:
The ROYAL HD1400MX will shred up to fourteen (14) sheets of 20-lb. bond paper and will
accept paper widths up to 8 2/3 inches. When shredding small material like envelopes,
receipts or credit cards insert them in the middle of the feed opening. Never place or attempt
to shred CDs or DVDs in the paper feed opening. The paper feed opening is designed to
shred paper only. CDs and DVDs should be placed in the slotted opening marked for CDs.
Cautions:
1. Keep all loose articles of clothing, ties, jewelry, hair or other small items
away from the feed opening to prevent injury.
2. Keep the shredder turned off or unplugged when not in use for prolonged
periods of time.
3. Remove all paper clips from paper before shredding. The HD1400MX
will cut staples and credit cards; however, proper discretion is recommended.
4. Do not place hands or fingers into the shredder throat as serious injury
could result.
5. When manually changing feed direction, pause long enough for the motor
to stop.
( )
button depressed and the shredder
2
Publicité
