Télécharger Imprimer la page

favex Click-Click Notice page 2

Publicité

Les langues disponibles

Les langues disponibles

MANUAL
You are invited to
join IOT.FAVEX.FR
platform !
Login !
Empty bottle : The changeover is red.
Now, the changeover
take gaz from the full
bottle (the left bottle).
Maintenance and security
• Do not install this unit near medical devices such as pacemakers or hearing aids.
• Do not install this unit near petrol stations, fuel depots, chemical plants or blasting operations as this unit may interfere with the operation
of such equipment.
• Interference may occur if this unit is used near televisions, radios or computers.
• Condensation may occur if the unit has been stored in a cold environment.
• To ensure that the unit is completely dry, an acclimatisation period of at least 3 hours must be observed before commencing installation.
• To avoid possible damage, we recommend that you use only the specified accessories. They have been tested with this unit.
• Do not use the unit outside the coverage area stated in the product specifications.
• Do not expose the unit to temperature outside the operating range (-20°C / +60°C) or in an environment saturated of humidity.
• Do not store or use the unit in dusty or dirty areas, as moving parts may be damaged.
• Do not use chemical agents to clean the unit.
• Do not attempt to disassemble the device. This would invalidate the guarantee.
• Do not drop the device.
• Do not place the unit next to computer hard drives, credit cards, or other magnetic storage suport. The magnetic content of these devices
could be affected.
Read these instructions carefully and keep them safe for future reference.
It is essential to understand this information and to follow the instructions in these instructions to ensure that this unit is installed, operated
and maintained properly and safely.
This unit is not designed for use in or for portable applications (within 20 cm of the user's body) and such uses are strictly prohibited.
In the event of installation, use or maintenance of this product which has not been carried out in accordance with these instructions, CONNIT
cannot be held responsible for any damage caused to the installation itself or to other property or persons.
If you do not use Click-Click®, please store it inside and disconnect it.
This device is under the responsibility of its user, who must use and keep the product in a safe place out of the reach of children.
At the end of their useful life, the packaging and the product, should be disposed of via a suitable recycling center for Waste Electronic and
Electrical Equipment (WEEE). Do not dispose of with your normal household waste. Do not burn.
102 bis, av. du président Kennedy
75016 Paris, France
+33 1 55 74 74 10
EN
Click-Click® is a remotely solution, simple and
connected, of gaz bottle supervision.
Linked to IOT.FAVEX.FR platform, Click-
Click® allows you to manage your entire
1
Clip Click-Click®
Clip Click-Click® on your CAVAGNA changeover.
The two pieces must be on each side of the
bracket. Then, turn the bracket towards one of the
two bottles.
3
Receive a signal and replace the empty bottle
You receive an alert by e-mail .
The bracket is towards the
empty bottle, the one to
change.
FAVEX S.A.
park of gaz bottle.
Replace the empty bottle with a
new one. Rotate your Click-Click®
towards the full bottle.
Guarantee and declaration of conformity
Guarantees
The product is guaranteed for 24 months.
Miscellaneous
The photographs of our products and the technical specifications are only indicative and may be modifie d at any time without justifying a
cancellation of order or giving rise to compensation or penalties.
Manufacturer : CONNIT SAS
Product identification: Click-Click®
This unit has been tested and declared compliant with the requirements stated in Article 3 of RED Directive 2014/53/UE and Council Directive
2014/30/UE. The device complies with the electrical safety requirements EN 62368-1:2014 and EN 60950-22:2006.
Applicable standards:
RED : ETSI EN 300-220 v3.1.1 2017
RED draft 489-3:2017 v2.1.1
RED draft 489-1:2017 v2.2.0
EN 61000-4-2:2009
EN 61000-4-3:2006+A1:2008+A2:2010
IEC 61000-4-2:2008
IEC 61000-4-3:2006+A1:2007+A2:2010
IEC 61000-4-8:2009
EN 62368-1:2014
EN 60950-22:2006
ATEX : AR19ATEX022
Data measured
State of gaz bottle and position of
Click-Click®
Networks used
Networks : Sigfox and/or LoRa
Communication : Uplink or
bidirectional
Other data collected
- Voltage level of battery
- Internal temperature of the housing
- Anti-removal alerts
2
Initialize Click-Click®
Wait until the Click-Click® stops flashing.
Place the magnet in front of the Click-Click®
and wait for 3 successive flashes per second.
As soon as the Click-Click® flashes 3 times
per second, remove the magnet (within 5
seconds).
Once the calibration is complete, do not never keep the
magnet near the Click-Click®.
The changeover
comes to green.

Publicité

loading