Kimex 011-1002 Manuel De Montage page 2

Réf. 011-1002
Quick Mount LCD Monitor / TV Kit
LCD TV / Montior Plate
Wall Plate
A1
C
B1
1
Use the2 / " wood screws,
4
mount the wall plate to wall stud
or use enclosed sheet rock mollies
Note: Bracket is intended
for use on LCD monitors up to
35kgs/77lbs
Front
FIXED WALL MOUNT
A2
F
D
C
I H G
E
A1=265(10.4") E=180mm(7.1"))
A2=254mm(10")) F=200mm(7.9"))
B1=242mm(9.5"))G=100mm(4"))
B2=224mm(8.8"))H=75mm(3"))
C=220mm(8.6")) I=50mm(2"))
D=120mm(4.7"))
VESA 50/75/100/200/100x200/120x180mm
B2
1
Use the / " bolts, mount
2
the monitor plate to back of monitor,
(Note corners holes to accommodate
both 75/100/200mm VESA systems)
1
Use the / " bolts to lock and secure
4
your monitor in place
R
VESA is a registered Trademark of the
Video Electronics Standards Association
LCD/TFT
AS Easy as 1,2,3!
Step 1a
1
Using the2 / " wood screws,
4
mount the wall plate to wall stud
Step 2
1
Using the / " bolts,mount
2
the monitor plate to back monitor,
Depending on your monitor, Use the
75mm or 100mm pre-drilled holes
13"- 42"
30 kg
Step 1b
Pre-drill these mounting holes with a 10mm
masonry bit to an least 60mm in depth.
1
Using the2 / " wood screws and concrete
4
anchor mount the wall plate to wall
Step 3
Simply silp your monitor onto your wall
1
mount, and secure with / " locking
4
bolts from below,
and you are finished! Enjoy!
R
VESA is a registered Trademark of the
Video Electronics Standards Association
Back