All manuals and user guides at all-guides.com
BP124
6
Using the device
6.1
Charging the lithium-ion battery
!
WARNING!
If batteries are overcharged they may set on fire. Only use the
charger supplied.
➤ Place the charger (fig. 3 1, page 3) on a firm base.
➤ Fold the handle of the battery upwards.
➤ Connect the DC connecting lead (fig. 3 2, page 3) of the charger to the
battery (fig. 3 3, page 3).
➤ Connect the charger to the AC power supply.
✓ The LED on the charger shows the battery charge level:
– Red: battery charging is in progress
– Green: the battery is fully charged
I
NOTE
The LED also shows green when there is no battery connected
to the charger.
If the battery has not been charged for a long time, the charger
will not immediately show the charge level. Leave the battery
connected to the charger until the LED shows red.
✓ Charging takes around 5 hours.
I
NOTE
If the battery has been completely discharged, the recharging
process can take up to 10 hours.
✓ When the battery is charged up, the charger switches off.
6.2
Supplying the cooler with power
➤ Connect the DC plug to your coolbox.
EN
Using the device
17