Accessories - Thermador RACKKIT27D Manuel D'installation Et D'utilisation

Accessories

Telescopic Rack
This rack allows for easier access when inserting or
removing food. Do not use the self-clean mode to clean the
racks.
Note (for Professional Models POD301,
PODC302, PODM301, PODMW301):
Do not use oven with telescopic rack inserted in rack
position 0 (lowest position, see figure below). Always use
the flat rack in this position.
Flat Rack
Do not use the self-clean mode to clean the racks.
Inserting Racks into Oven
Telescopic Rack
6
5
4
3
2
1
0
English 1
CAUTION:
To avoid burns, place oven racks in desired
positions before turning oven on. Always use
oven mitts when the oven is warm. If a rack
must be moved while the oven is hot, do not
let oven mitts contact hot heating elements.
To avoid possible injury or damage to the
appliance, ensure rack is installed exactly
per installation instructions and not
backwards or upside down.
1. Hold the rack on a slight
angle.
2. Engage the rear hooks in
the accessory brackets.
3. Hold the rack straight.
4. Push the rack in until it is
even with the front hooks.
5. Lift the rack up.
6. Push the rack in
completely.
7. Engage the rack's front
hooks in the accessory
brackets.
This is very important to
ensure that the rack is
installed correctly (see
the enlarged picture).