Software Update (Usb); Atv And Other Modes; Pc Mode - Tokai TTE-22D2104K Manuel D'utilisation

All manuals and user guides at all-guides.com
5.11 Reset
This item is used to reset to factory default settings.

5.12 Software Update (USB)

This item is used to update software through USB memory device.

ATV AND OTHER MODES

- Press SOURCE button on the unit or remote control to select desired input source.
- For menu operations in these modes, please refer to the menu operations of DTV mode.

PC MODE

- Connect a personal computer to this unit.
- Power on your computer and this unit.
- Press SOURCE button on the unit or remote control to select PC input source.
- Press MENU button to display the main menu and select Picture using LEFT/RIGHT
navigation button.
- Use UP/DOWN navigation button to highlight PC Setting and press OK or RIGHT navigation
button to enter it.
- Press UP/DOWN navigation button to
select preferred item.
- Press OK or RIGHT navigation button to
enter submenu. Press LEFT/RIGHT
navigation button to adjust the value.
1. Auto Adjust
This item is used to adjust the PC screen
automatically.
2. H Position
This item is used to adjust the value of horizontal position (available range: -30 to 30).
3. V Position
This item is used to adjust the value of vertical position (available range: -30 to 30).
4. Phase
This item is used to adjust the picture apply to the TV (available range: 0 to 31).
5. Clock
This item is used to adjust the signals transfer speed (available range: -30 to +30).
NOTE: For other menu operations in PC mode, please refer to the menu operations of DTV
mode.
85